Chloride ISE Analyzer

Automate Your Chloride Analysis using ISE

The Labfit AS3230 Chloride ISE Analyzer automates the Chloride analysis utilizing the latest in Ion Selective Electrode (ISE) technology. No longer will you have to purchase expensive instrumentation when a more affordable and just as accurate solution to your Chloride analysis is available. The Chloride Analyzer removes your technician from menial tasks to perform more important laboratory duties. The Labfit AS3230 Chloride ISE Analyzer conforms to standard methods: ASTM D512-89, F1277-90, D4208-88, E256-91; EPA 60 FR 37974, 59 FR 62456; APHA 4500-CL (D), 4500-CL (I); AOAC 971.27, 980.25, 962.05, 962.07, 963.05, 966.10, 969.10. Sample preparation for the AS3230 Chloride Analyzer is very simple as you only need to add the sample, ISA & then stir the solution to obtain an accurate measurement.

Benefits of the AS3230 Chloride Analyzer by ISE

With the Labfit AS3230 Chloride Analyzer measurement is simple, fast, easy to perform, and inexpensive. The Labfit AS3230 Chloride Analyser makes use of the syringe pump to accurately determine the end-point using the Chloride ISE probe through titration. The Intelligence built into our software allows the AS3230 Chloride Analyzer to determine which syringe pump to use when the pH is above or below the configurable setting within the method. The Labfit AS3230 Chloride Analyzer is ideal for water, waste water, and other aqueous solutions. The AS3230 Chloride Analyser displays on-screen sample data that have been analyzed, about to be analyzed and samples that have failed or passed analysis in a very intuitive way.

Features of the AS3220 Chloride Analyzer

The Labfit AS3230 Chloride Analyzer uses an integrated washing mechanism that is automated through the advanced method configuration parameters. Full control over washing, stirring, stability setting and delay periods as just some of the settings available for configuration. The AS3230 features calibration positions that can be used when automatic electrode calibration is enabled in the method. The Chlroride Analyzer also provides you with the tools to add as many quality control or in-house standards as you wish and in any position within the system. The Labfit AS3230 Chloride Analyzer accommodates 3 racks of 60 samples for a total sample count of 180. The Chloride Analyzer can also be set to run an additional 180 samples at the end of the day further increasing your productivity and increasing your bottom line.

Sampling Bed

3 Racks, 180 Samples

The pH, EC & ISE robot provides adequate room for up to 180 samples. At the end of the day, place another 3 racks onto the robot to an extra 180 samples.

Measurement

pH, EC & ISE Display

The pH, EC & ISE robot displays the location of the QC sample, current measurement, failed and passed samples to you for easy identification.

Quality Control

Advanced Quality Control

Now you can set your QC variables including upper and lower limits to pH, EC and ISE measurments. With our advance conditional logic, the system can be instructed to wash, calibrate or pause the analysis.

Buffer Pump

Accurate Buffer Dispensing

The syringe pump accurately dispenses buffer solutions into your samples upon condition set within the method. The pump automatically refills itself during a measurement, saving time so the syringe is always full.